Posts

U.S. Mandates Reversing Cameras in Vehicles by 2018

The National Highway Safety Transportation Agency (NHTSA) recently announced a new rule that will require vehicles built from May 1, 2018 onwards to have a reversing (also known as a “back-up”) camera. This rule will apply to all road-legal vehicles under 10,000 pounds (4.5 Tonnes).

The NHTSA cites an average of 210 fatalities and 15,000 injuries from “back-up” or reversing accidents every year, and notes that children under 5 years old account for 31 percent of the deaths.

According to the rule, all vehicles manufactured on or after May 1, 2018 will have to be equipped with a rear-view camera. It also included specifics on response time after the vehicle’s transmission is shifted into reverse (2 seconds) and “linger time” of how long the camera remains active after shifting from reverse (between 4 and 8 seconds).

Introducing View-it

view-it logo 2016

View-it allows a reverse camera feed to be relayed direct to an in-vehicle computer display, thus avoiding the need for a separate display screen.

As soon as the vehicle is put in reverse the image from the reverse camera is instantly displayed on the computer screen. Once reverse is dis-engaged, the display reverts to its previous state freeing up the screen for normal use.

View-it is suitable for any vehicle fitted with a compatible camera and offers the following advantages:

  • Cost Avoidance – No need to buy an expensive reverse camera set-up. Use your existing in-vehicle computer for the reverse feed image.
  • Safety – Reduce the distraction by reducing the amount of mounted monitors in the vehicle.
  • Unobtrusive – Initializes a full-screen image containing the camera feed. When not reversing view-it is completely invisible to the user.
  • The view-it product includes software and smart cables ready for installation.

View-it is a stand-alone product that also integrates well with the Blank-it distracted driving solution and we recommend that all fleet owners consider installation of Blank-it & view-it as a vital part of their safety/OH&S obligations.

Find out more about view-it

 

Introducing view-it

view-it-improved-06-for-blogThe clever folk at Blank-it have created a new product – called ‘view-it’ – to work seamlessly in vehicles with reverse cameras fitted.

View-it allows the reverse camera feed to be relayed direct to an in-vehicle computer display, thus avoiding the need for separate display screens:

  • As soon as the vehicle is put in reverse the image from the reverse camera is instantly displayed on the in vehicle computer screen;
  • Once reverse is disengaged, the display reverts to its previous state freeing up the screen for normal use.

What the driver sees:

  • When driving around normally, you don’t know it’s there
  • When reversing, you get an instant full-screen video feed

View-it is a stand-alone product that can work on its own, but also integrates well with the Blank-it distracted driving solution and we recommend that all fleet owners consider installation of Blank-it as a vital part of their safety/OH&S obligations.

Blank-it has been designed specifically to address the problem of driver distraction caused by in-vehicle computers and laptops. It is easily installed, doesn’t rely on 3rd party input such as GPS, is fully customisable for different working environments and will help businesses conform to distracted driving legislation and OH&S requirements